 |
Ideal for uniform, brushed finishes. General purpose cleaning, satin finishing, rust removal. Imparts a clean, bright surface on stainless steel and other materials. Available in 6"x1/2"1"; 6"x1"x1"; 6"x2"x3"; 8"x1/2"x3"; 8"x1"x3"; 12"x1"x5"; 12"x2"x5" |
|
|
 |
Deburring, finishing, blending, and fast stock removal on ferrous and non-ferrous materials. A wide range of densities available. Available in2"x1/4"x1/4"; 2"x1/2"x1/4"; 3"x1/4"x1/4"; 3"x1/2"x1/4"; 6"x1"x1"; 8"x1"x3"; 12"x1/2"/11/4"; 12"x1"x11/4" |
|
|
 |
For use on small, straight grinders. Cleaning, finishing and polishing. Fast removal of rust oxidation and scale. Available 2", 3", 4", 5" diameter. And various ply and grade. |
|
|
 |
Finishing, cleaning, blending applications on aluminum, brass stainless steel. Available medium and hard density n the following diameters. 6"x1"2"; 8"x1"x3"; 12"x1"x5; 12"x2"5" |
|
|
 |
Very comformable and durable. Good starting point for light deburring, blending and final finishing. Discs are perfect for use on pedestal grinders. Rolls can be cut into a wide variety of shapes and sizes. Rolls available in 4"x30' and 6"x30'. Discs available in various sizes. |
|
|
 |
A variety of pads designed for hand applications of deburring, polishing, cleaning, finishing, and surface preparation on metal composite or plastic surfaces. Pre-cut 6"x9" |
|
|
 |
Blending, surface preparation, light deburring, cleaning, and finishing on all types of ferrous and non-ferrous metals, composite, or plastic surfaces. Available in three attachment styles. Available in 3/4"; 1"; 11/2"; 3" diameter. |
|
|
 |
Removing light oxidation, blending minor surface imperfections, surface prep and general equipment cleanup. vailable in various sizes. |
|
|
 |
Deburring, cleaning, and polishing I.D. of steel, aluminum or plastic pipe or tubing. vailable in 2" and 3" diameter. |
|
|
 |
Ideal for polishing and cleaning inside diameters and hard-to-reach areas on metal surfaces. Perfect for automotive applications. Available in new Cross Buffs(1" and 11/2"), Flutter Buffs(6") , Square Buffs(3"). |
|
|
 |
Deburring, blending, polishing, surface prep and finishing on all metals, especially stainless steel and aluminum. For all Pneumatic, Portable and Floor Mounted/Platen Sanders. |
|
|
 |
Final finishing on aluminum, brass and chrome, when used with a metal polish. Available in 1", 2" and 3" diameters. |
|
|
| |
|
| |
|
